Wednesday, 1 October 2014
Thursday, 10 April 2014
How to Speed up internet connection upto 20%
How to Speed up internet connection upto 20%
It is a hidden truth that Microsoft reserves 20% of your available bandwidth for their own purposes like windows updates and introspecting your PC etc. so if you have Windows operating system then you are actually using 20% slower internet speed. But don’t worry we have the solution to get back your 20% bandwidth. Just follow the following procedures:
1. First of all make sure that you are logged in as administrator.
2. Go to start --> Run --> gpedit.msc. Press ok.
3. Then go to Computer Configuration --> Administrative Templates --> Network --. OS packet Scheduler.
4. On the right side you will see the option of Limit Reservable bandwidth. Open and select Enabled, and change the value from 20 to 0
Now your internet speed will be 20% faster. So enjoy and promote this blog......
It is a hidden truth that Microsoft reserves 20% of your available bandwidth for their own purposes like windows updates and introspecting your PC etc. so if you have Windows operating system then you are actually using 20% slower internet speed. But don’t worry we have the solution to get back your 20% bandwidth. Just follow the following procedures:
1. First of all make sure that you are logged in as administrator.
2. Go to start --> Run --> gpedit.msc. Press ok.
3. Then go to Computer Configuration --> Administrative Templates --> Network --. OS packet Scheduler.
4. On the right side you will see the option of Limit Reservable bandwidth. Open and select Enabled, and change the value from 20 to 0
Now your internet speed will be 20% faster. So enjoy and promote this blog......
increase ram in window 7 with the help of pendrive
If you are a windows-7 user, working on 1GB RAM. And want to improve your system performace by adding extra RAM.
Then just wait, i have a solution for your slow PC/laptop.
Instead of buying a RAM in 1000/Rs or 1500/Rs.
You can do this by using your PEN drive.
... Just follow these steps and enjoy.
1 - Get a 2 or 4 GB PEN drive( cost 250 or 300 Rs).
2 - Attach to your system.
3 - Open Windows-7 system
4 - Go to My Computer.
5 - Right click on your external drive.(pen drive)
6- Click on properties option.
7- Select Ready Boost Option.
8 - Now select Use this device (it will take some time to configure your pen drive in RAM)
9 - Click on "OK" button
10 - Enjoy and say thanks to ME.
If you get any problem then first Format your External Drive and follow step 5 to 10.
Say to Every One for this.
Note:- This functioning requires USB 2.0 or higher.
guyz don't forget to put your valuable comments......
Then just wait, i have a solution for your slow PC/laptop.
Instead of buying a RAM in 1000/Rs or 1500/Rs.
You can do this by using your PEN drive.
... Just follow these steps and enjoy.
1 - Get a 2 or 4 GB PEN drive( cost 250 or 300 Rs).
2 - Attach to your system.
3 - Open Windows-7 system
4 - Go to My Computer.
5 - Right click on your external drive.(pen drive)
6- Click on properties option.
7- Select Ready Boost Option.
8 - Now select Use this device (it will take some time to configure your pen drive in RAM)
9 - Click on "OK" button
10 - Enjoy and say thanks to ME.
If you get any problem then first Format your External Drive and follow step 5 to 10.
Say to Every One for this.
Note:- This functioning requires USB 2.0 or higher.
guyz don't forget to put your valuable comments......
HOW TO INCREASE INTERNAL MEMORY OF ANDROID DEVICE BY PARTITION SD CARD
HOW TO INCREASE INTERNAL MEMORY OF ANDROID DEVICE BY PARTITION SD CARD FOLLOW THIS STEP-
1.First you have to download Mini Tool Partition Wizard Manager.2.Insert your SD card to a card reader and open it on your computer.
3.Back up all your files to the computer because partitioning will wipe your data.
4.Open Mini Tool in your computer. Locate your SD card (be careful in choosing and make sure not to choose the drive of your computer)
5.Right click and choose Delete.
6.Right click on it again and choose Create New. Create “FAT32″ partition (This is where all your media files will go. Be sure to make it bigger than the 2nd part)
7.Select “Create as: PRIMARY”
8.Next, create an ext2/ext3/ext4 partition (if you’re on stock ROM, choose ext2). This is where your apps will go. I suggest a value of 512Mb or 1Gb would be big enough but if you insist you can go as high as 2Gb.
9.Select “Create As: PRIMARY” (make sure that it is both set to primary because it will not work if it is not set to primary)
10.Click the “Apply” button on the top left corner and wait for it to finish the process. Done.
11.Put back your SD card to your phone and switch it on.
12.Download and install Link2sd from Google Play Store.
13.Open Link2sd. You will be prompted to choose between ext2, ext3, ext4 and FAT32. Select ext2.
14.It will say mount script created. Reboot your phone now.
15.Open link2sd and if the message doesn’t show up, you succeded.
16.Go to Link2sd>Settings>check the autolink (to automatically move apps upon installation)
17.If you already have some apps, select “move to phone” then after moving select “Create Link” (be sure to check the three files: app, dalvic-cache and library files)
18.To check your memory, select “Storage Info”. This will show you the current state of your internal memory, FAT32, and ext2 partition.
19.Now you’re done and ready to install vast amount of applications as you wish!
Thanks nd if u have any problem in doing this then plz comment below.
Sunday, 6 April 2014
HOW TO ACTIVATE SIM CARD INSTANTLY
HOW TO ACTIVATE SIM CARD INSTANTLY
When u buy any new sim . The shopkeeper will tell u to wait few hours/days to get the sim
activated. ..
when u purchase a new sim card u will get two or three papers in which you have to fill the details.. .
check the page in which your mobile number is written. and near your number you can see SR NUMBER.[serial number] . . .
you can also find SR. No. on sim card's slip on plastic cover.
IF YOU WANT INSTANT ACTIVATION THEN
INSERT SIM IN YOUR MOBILE AND DIAL THE SERIAL NUMBER TWO TIMES.. . ..Thats all..your sim card'll be activated within one
minute.
Wednesday, 2 April 2014
HoW TO HIDE FILES BEHIND AN IMAGE STEPS
HoW TO HIDE FILES BEHIND AN IMAGE STEPS:
1.) Select files you want to hide
2.) Store these files in .RAR file
format
3.) Select the image that is used
to hide those files 4.) Both of the image as well as
.RAR file copy them on the Desktop
5.) Open Command prompt using
Run as administrator (for opening
command prompt in
Administrator ..go to search in start button and type cmd and then right
click on cmd and select Run as
Administrator)
6.) After opening of command
prompt type the command shown
below for changing directory cd Desktop
7.) After this all give the name to
each files such as for hiding files
(programmer.rar ) and for the image whose is hiding the file
(raja.jpg )……it is necessary that
extension(.jpg, .rar)must be there for each of the file
8.) Type the command as below:
copy /b programmer.rar
+raja.jpg newfilename.jpg
hide files behind the image
9.) Now both files are merged into a single one file named as
newfilename.jpg
you can use any
name in place of newfilename.jpg
but (.jpg extension is necessary)
10.) Now you can see on the desktop that a file is created having
name newfilename.jpg
11.) That’s all if you want to open
the newfilename.jpg file then it will open as an image not as the file
you wish to hide
1.) Select files you want to hide
2.) Store these files in .RAR file
format
3.) Select the image that is used
to hide those files 4.) Both of the image as well as
.RAR file copy them on the Desktop
5.) Open Command prompt using
Run as administrator (for opening
command prompt in
Administrator ..go to search in start button and type cmd and then right
click on cmd and select Run as
Administrator)
6.) After opening of command
prompt type the command shown
below for changing directory cd Desktop
7.) After this all give the name to
each files such as for hiding files
(programmer.rar ) and for the image whose is hiding the file
(raja.jpg )……it is necessary that
extension(.jpg, .rar)must be there for each of the file
8.) Type the command as below:
copy /b programmer.rar
+raja.jpg newfilename.jpg
hide files behind the image
9.) Now both files are merged into a single one file named as
newfilename.jpg
you can use any
name in place of newfilename.jpg
but (.jpg extension is necessary)
10.) Now you can see on the desktop that a file is created having
name newfilename.jpg
11.) That’s all if you want to open
the newfilename.jpg file then it will open as an image not as the file
you wish to hide
Posting Facebook Status Upside Down
Posting Facebook Status Upside Down
facebook status upside down
If you want to post something creative or something cool as your facebook status then this trick will let you post any facebook status upside down. Basically this is a website which allows you to flip your text. so lets dive into it.
How To Do ?
First GoTo FlipText Website by Clicking Here. http://www.fliptext.org/
Enter you message or text in text area and click on Flip.
Copy the upside down text and paste it in your facebook status or where ever you want to use it.
Enjoy!
facebook status upside down
If you want to post something creative or something cool as your facebook status then this trick will let you post any facebook status upside down. Basically this is a website which allows you to flip your text. so lets dive into it.
How To Do ?
First GoTo FlipText Website by Clicking Here. http://www.fliptext.org/
Enter you message or text in text area and click on Flip.
Copy the upside down text and paste it in your facebook status or where ever you want to use it.
Enjoy!
Subscribe to:
Posts (Atom)